D115P with Alcatel 4400 problem

please paste the dahdi_cfg -vvv output.

also try cat /proc/interrupts to see if the card is generating irq, if no, check the card id switch, make sure it is zero.

Card generate interrupts , below you can see this


root@1e1:/# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 129 0 0 0 IO-APIC-edge timer
1: 8 0 0 0 IO-APIC-edge i8042
4: 2 0 0 0 IO-APIC-edge
6: 5 0 0 0 IO-APIC-edge floppy
8: 0 0 0 0 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
10: 0 0 0 0 IO-APIC-fasteoi ohci_hcd:usb1
12: 115 0 0 0 IO-APIC-edge i8042
14: 689272 0 0 0 IO-APIC-edge ide0
15: 0 0 0 0 IO-APIC-edge ide1
28: 76654004 0 0 0 IO-APIC-fasteoi opvxd115
30: 78186 0 0 0 IO-APIC-fasteoi eth0
31: 67288 0 0 0 IO-APIC-fasteoi cciss0
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 76618731 76619855 76619897 76619658 Local timer interrupts
RES: 13292 10160 39399 9951 Rescheduling interrupts
CAL: 26 52 54 45 Function call interrupts
TLB: 1177 1110 2535 2824 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
SPU: 0 0 0 0 Spurious interrupts



DAHDI Tools Version - 2.3.0

DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: none) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: none) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: none) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: none) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: none) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: none) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: none) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: none) (Slaves: 08)
Channel 09: Clear channel (Default) (Echo Canceler: none) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: none) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: none) (Slaves: 11)
Channel 12: Clear channel (Default) (Echo Canceler: none) (Slaves: 12)
Channel 13: Clear channel (Default) (Echo Canceler: none) (Slaves: 13)
Channel 14: Clear channel (Default) (Echo Canceler: none) (Slaves: 14)
Channel 15: Clear channel (Default) (Echo Canceler: none) (Slaves: 15)
Channel 16: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 16)
Channel 17: Clear channel (Default) (Echo Canceler: none) (Slaves: 17)
Channel 18: Clear channel (Default) (Echo Canceler: none) (Slaves: 18)
Channel 19: Clear channel (Default) (Echo Canceler: none) (Slaves: 19)
Channel 20: Clear channel (Default) (Echo Canceler: none) (Slaves: 20)
Channel 21: Clear channel (Default) (Echo Canceler: none) (Slaves: 21)
Channel 22: Clear channel (Default) (Echo Canceler: none) (Slaves: 22)
Channel 23: Clear channel (Default) (Echo Canceler: none) (Slaves: 23)
Channel 24: Clear channel (Default) (Echo Canceler: none) (Slaves: 24)
Channel 25: Clear channel (Default) (Echo Canceler: none) (Slaves: 25)
Channel 26: Clear channel (Default) (Echo Canceler: none) (Slaves: 26)
Channel 27: Clear channel (Default) (Echo Canceler: none) (Slaves: 27)
Channel 28: Clear channel (Default) (Echo Canceler: none) (Slaves: 28)
Channel 29: Clear channel (Default) (Echo Canceler: none) (Slaves: 29)
Channel 30: Clear channel (Default) (Echo Canceler: none) (Slaves: 30)
Channel 31: Clear channel (Default) (Echo Canceler: none) (Slaves: 31)

31 channels to configure.

Setting echocan for channel 1 to none
Setting echocan for channel 2 to none
Setting echocan for channel 3 to none
Setting echocan for channel 4 to none
Setting echocan for channel 5 to none
Setting echocan for channel 6 to none
Setting echocan for channel 7 to none
Setting echocan for channel 8 to none
Setting echocan for channel 9 to none
Setting echocan for channel 10 to none
Setting echocan for channel 11 to none
Setting echocan for channel 12 to none
Setting echocan for channel 13 to none
Setting echocan for channel 14 to none
Setting echocan for channel 15 to none
Setting echocan for channel 16 to none
Setting echocan for channel 17 to none
Setting echocan for channel 18 to none
Setting echocan for channel 19 to none
Setting echocan for channel 20 to none
Setting echocan for channel 21 to none
Setting echocan for channel 22 to none
Setting echocan for channel 23 to none
Setting echocan for channel 24 to none
Setting echocan for channel 25 to none
Setting echocan for channel 26 to none
Setting echocan for channel 27 to none
Setting echocan for channel 28 to none
Setting echocan for channel 29 to none
Setting echocan for channel 30 to none
Setting echocan for channel 31 to none

Hi,
Is there crc4 in your pri? If not, please disabled the crc4 in /etc/dahdi/system.conf.

please send ssh root access to This email address is being protected from spambots. You need JavaScript enabled to view it.

CRC4 is enabled on ALCATEL 4400 and on my dahdi.

I was sended root access.

Hello mr Czelusc,

hardhdlc=16
#dchan=16
change to
#hardhdlc=16
dchan=16
as 1st thing.
as another, give me mgr settings regarding your a4400 config, as trkstat N of your TG to the asterisk.

I think that i've made good entry in Wiki years ago, and it should work like a charm (many, many links put into service).
BTW Czelusc is "abyss" in Polish, if anyone asks.

i] Last edited by krzysioD at 2011-4-10 01:12 [/i